Strip Laggings

Strip lagging is an effective, cheap, convenient and air bubble resistant pulley lagging process used globally.

‘Instacon’ is a reputed & well established manufacturer of Strip Lagging in the country.

‘INSTA STRIP’ strip lagging rubber sheet is much advantageous than the conventional pulley lagging rubber sheets.

Salient features of ‘INSTA STRIP’ Strip Lagging are;

 Minimal/ No Wastage

 There is no/ minimal wastage of ‘INSTA STRIP’ strip lagging sheet material. It is available in standard / manageable/ maneuverable size of 200 mm width and continuous length of 50 meters or tailor made as per customer requirements (still larger diameter rolls are available subject to transportable diameter/ weight).

   Conventional Pulley Lagging sheets are available in higher widths, the extra width Pulley lagging sheets are cut to make exact sizes and excess portion left is often thrown/ discarded/ scraped as wastage, which is a sheer loss to the user/ buyer/ customer.

Light Weight

 ‘INSTA STRIP’ is light weight, handy and easy to install.

 Conventional Pulley Lagging being bulky, very heavy in weight & size, un-manageable/ very difficult to maneuver/ handle and install, whether in roll or near to size form.

 Manageable / Maneuverable

‘INSTA STRIP’ strip lagging being manageable / maneuverable is easy to install, removal of entrapped air is possible, requiring less down time. 

Conventional Pulley Lagging being un-manageable / difficult to maneuver, leave possibility of air entrapment between pulley and the lagging sheet, which may lead to premature separation / failure of Conventional Pulley Lagging.

 Easy to repair

As the name depicts ‘INSTA STRIP’ strip lagging is available in strips thus it is easy to repair/ maintain. Only damaged/ worn out portion of the lagging is removed and replaced with fresh ‘Insta Strip’ leaving remaining portion as it is thereby saving huge cost of lagging sheet, saving on down time, effort etc.

In case conventional pulley lagging, complete sheet is replaced as effective repairs are not possible, which is very costly, time and effort consuming preposition.

SUITABILITY FOR SMALLER DIAMETER PULLEYS

The ‘Insta Strip’ can be fitted on much smaller diameter pulleys than the conventional lagging sheets.

 LESS INVENTORY

 Since one type of ‘INSTA STRIP’ can be used for all types and sizes of pulleys this facilitates less inventory level.

A huge inventory level is required for conventional lagging sheet as different sizes will have different inventory levels.

Environment/ pollution control

Our mission is to protect environment from warming and toxicity for our own and future generation’s sake by virtue of providing energy efficient products, those render longer life.

‘INSTA STRIP’ strip lagging sheet is available with SPECIAL BONDER RUBBER. This feature facilitates strip lagging application directly to the pulley (no buffing/ grinding of ‘Insta Strip’ is required) and offers very high bond strength between pulley and the strip lagging.

Conventional pulley lagging sheets may not be available with special bonder rubber. Rubber particles and fumes generated/ flare up during the buffing/ grinding are possible health hazards and cause of concern worldwide.

The higher life offered by ‘INSTA STRIP’ ultimately conserves energy/ natural resources by avoiding repeated manufacturing and virtually eliminating pollution that would be caused due to repeatedly generated scraps. We take utmost care for manufacturing, supply and service products.

Excellent Bonding

The best feature of ‘INSTA STRIP’ strip lagging is that it is available with ‘INSTA FIX’ vulcanizing solutions, which ensures EXCELLANT BONDING between lagging and pulley due to ABSOLUTE COMPATIBILITY.

The Conventional pulley laggings may not be available with compatible/ mother compounds, which leave scope for POOR BONDING between pulley and lagging sheet.

Our special designs not only cut on costs per ton material handled but also cut substantial costs on power consumption (an area, which most of the customers/ users/ purchasers over look/ ignore due to compulsion of time, price, awareness etc).

PULLEY SHAFT DAMAGE DURING REMOVAL / TRANSPORT

 There’s no need to remove pulley/ shaft for ‘INSTA STRIP’ fixing hence there is no fear/ chance of damage or unbalancing of both.

 For hot lagging process removal of pulley/ shaft from the installation is a must.

 EXPORT

The ‘Insta Strip’ is exported to various countries.

To strengthen your confidence further, we are enclosing herewith sample of ‘INSTA STRIP’ strip lagging and CD demonstrating process/ procedure of strip lagging fixing for your evaluation.

 We hope the above will strengthen your confidence in ‘INSTA STRIP’ strip pulley lagging and you would like to have benefits of it.